DD-WRT is a powerful open-source Linux-based firmware that enhances the functionality of your router. Alpine Linux is a lightweight and secure distribution that is ideal for running on a router. In this tutorial, we will guide you through the steps to install DD-WRT on Alpine Linux Latest.
Before we can begin the installation process, it is important to ensure that your router is compatible with DD-WRT. You can check the compatibility list on the official website of DD-WRT.
Download the DD-WRT firmware for your specific router from the official website of DD-WRT. Save it to a location on your computer where you can easily find it.
Open the terminal on your Alpine Linux system and install the required dependencies for this installation using the following command:
$ sudo apk add curl nano tar xz-utils
Now we need to connect our Alpine Linux machine to the router. Connect one end of the Ethernet cable to the LAN port of the router and the other end to the Ethernet port on your computer.
Open a web browser and enter the IP address of your router into the address bar. This is typically something like 192.168.1.1, but it may vary depending on your router's make and model. Enter your login credentials to access the configuration page of your router.
Once you're on the router's configuration page, navigate to the firmware update section. Here, click on the "Choose File" button and browse to the location where you downloaded the DD-WRT firmware.
Select the DD-WRT firmware and click "Upload." Wait for the firmware to upload and verify its authenticity.
After the verification process is complete, you'll be prompted to confirm that you want to flash DD-WRT. Click "Yes," and the router will begin the process of flashing DD-WRT onto its firmware.
The flashing process will take a few minutes to complete. It is important that you do not interrupt the process, as this can break your router. Once the flashing is complete, the router will automatically reboot with DD-WRT as its firmware.
Congratulations, you have successfully installed DD-WRT on Alpine Linux Latest. You can now log in to your router with the default login credentials and begin configuring your new firmware.
If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!
Alternatively, for the best virtual desktop, try Shells!
