How to install SANE Network Scanning on Alpine Linux Latest?

Sane Network Scanning allows you to share your scanner with other computers over the network. In this tutorial, we will show you how to install SANE Network Scanning on Alpine Linux Latest.

Prerequisites

Before installing SANE Network Scanning, make sure you have the following prerequisites:

• Alpine Linux Latest installed
• A scanner connected to your Alpine Linux Latest machine
• Root access or sudo privileges

Step 1: Update Alpine Linux Latest

The first step is to update your system packages by running the following command:

sudo apk update

Step 2: Install SANE Network Scanning

Now, you can install the SANE Network Scanning package by executing the following command:

sudo apk add sane-network

Step 3: Configure SANE Network Scanning

Once SANE Network Scanning is installed, you need to configure it. To do so, follow these steps:

Step 3.1: Define your scanner

Open the "sane-net.conf" configuration file located in /etc/sane.d/ using your favorite editor:

sudo nano /etc/sane.d/sane-net.conf

Add the following line to define your scanner:

# my scanner
net <IP_ADDRESS> # Replace IP_ADDRESS with the IP address of your scanner

Step 3.2: Allow access to your scanner

Open the "saned.conf" configuration file located in /etc/sane.d/ using your favorite editor:

sudo nano /etc/sane.d/saned.conf

Uncomment the following line:

# data_portrange = 10000 - 10100

Save and close the file.

Step 3.3: Restart SANE Network Scanning

To apply the changes, restart SANE Network Scanning by running the following command:

sudo rc-service sane-net restart

Step 4: Test SANE Network Scanning

Now that you have installed and configured SANE Network Scanning, you can test it.

Step 4.1: Check if SANE Network Scanning is running

Execute the following command to check if SANE Network Scanning is running:

sudo rc-service sane-net status

Step 4.2: Use your scanner from another computer

To use your scanner from another computer, you need to have a SANE Network Scanning client installed. You can install it by running the following command:

sudo apk add sane-utils

Then, you can use the following command to scan an image from another computer:

scanimage -d net:<IP_ADDRESS> > image.pnm

Replace IP_ADDRESS with the IP address of your Alpine Linux Latest machine.

Congratulations! You have successfully installed SANE Network Scanning on Alpine Linux Latest. You can now easily share your scanner with other computers over the network.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!