Tutorial: Installing SIP Irrigation Control on Alpine Linux Latest

SIP Irrigation Control is an open-source software for managing and controlling irrigation systems that is available on GitHub. In this tutorial, we will walk through the process of installing SIP Irrigation Control on Alpine Linux Latest.

Prerequisites

Before starting with the installation process, you will need:

• A machine running Alpine Linux Latest
• A working internet connection
• Basic knowledge of using the command-line interface

Installation

Step 1: Install Dependencies

The first step is to install the dependencies required for SIP Irrigation Control. Open a terminal and enter the following commands:

sudo apk add python3 python3-dev gcc musl-dev
sudo pip3 install Flask flask-cors flask-restful adafruit-circuitpython-mcp230xx adafruit-circuitpython-pca9685

Step 2: Install SIP Irrigation Control

The next step is to download and install SIP Irrigation Control from the GitHub repository. Follow the given steps:

cd ~
git clone https://github.com/dan-in-ca/SIP.git
cd SIP
sudo ./install.sh

Note: Make sure you have the necessary permissions to execute the install.sh script.

Step 3: Set Up SIP Irrigation Control

After installation, you need to set up SIP Irrigation Control by creating a configuration file. Follow the steps below:

cd /etc/sip/
sudo cp config.json.sample config.json

Next, you will need to configure the settings for your irrigation system by editing the config.json file using a text editor:

sudo nano config.json

In this file, you should define the following settings:

• PINS - the GPIO pins that will be used to control the valves
• ZONES - the list of irrigation zones
• PROGRAMS - the list of irrigation programs
• WEATHER - the weather provider

Once you have updated the configuration file, save the changes and close the editor.

Step 4: Start SIP Irrigation Control

Finally, start SIP Irrigation Control by executing the following command:

sudo systemctl start sip-irrigation

You can verify that the service is running by checking its status with:

sudo systemctl status sip-irrigation

If everything works correctly, you should see a message indicating that the service is active.

Step 5: Control Irrigation from Browser

Now that SIP Irrigation Control is up and running, you can manage and control your irrigation system by accessing the web interface through a browser. Open a web browser on your computer, and navigate to the following address:

http://[IP address]:8080/

Here, [IP address] refers to the IP address of the machine running SIP Irrigation Control. You can find the IP address of your machine by executing the following command:

ip address show

Once you're on the site, you can create and manage programs, zones, and schedules. You can also turn on and off the irrigation system and view the weather forecast.

Conclusion

In this tutorial, we have demonstrated how to install SIP Irrigation Control on Alpine Linux Latest. By following the given steps, you can successfully create a fully functional irrigation system, and effectively manage your irrigation needs.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!