How to Install Yeti-Switch on Alpine Linux

This tutorial will guide you through the process of installing Yeti-Switch on Alpine Linux. Yeti-Switch is an open-source tool for managing voice over IP (VoIP) traffic.

Prerequisites

Before setting up Yeti-Switch on Alpine Linux, you need to make sure that you have the following prerequisites installed and configured:

1. Alpine Linux - You should have the latest version of Alpine Linux installed on your machine.
2. Root access - You must have root-level access to your machine to install and configure Yeti-Switch.
3. Internet connectivity - Make sure that your machine is connected to the internet so that you can download and install the required packages.

Step 1: Install Required Packages

Before installing Yeti-Switch, you need to install the following packages on your Alpine Linux system:

apk add git gcc make mysql-dev libxml2-dev tzdata openssl-dev

Step 2: Download Yeti-Switch Source Code

The next step is to download the Yeti-Switch source code from the official repository. You can download the source code using the following commands:

cd /opt
git clone https://github.com/yeti-switch/yeti.git yeti-switch
cd yeti-switch
git submodule update --init --recursive

Step 3: Install Yeti-Switch Dependencies

After downloading the source code, you need to install the Yeti-Switch dependencies. You can install the dependencies by running the following command:

make requirements

Step 4: Configure Yeti-Switch

Once you have installed the required packages and dependencies, you need to configure Yeti-Switch. You can use the following command to create a configuration file for Yeti-Switch:

cp /opt/yeti-switch/config/database.yml.sample /opt/yeti-switch/config/database.yml

Edit the database.yml configuration file and specify the database details as per your requirements.

Step 5: Build and Install Yeti-Switch

Finally, it's time to build and install Yeti-Switch. You can use the following command to build and install Yeti-Switch:

make && make install

Step 6: Start Yeti-Switch

After installation, you can start Yeti-Switch by running the following command:

/opt/yeti-switch/bin/yeti-switch

Conclusion

That's it! You have successfully installed Yeti-Switch on Alpine Linux. With Yeti-Switch installed, you can now manage your VoIP traffic with ease.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!