DD-WRT is a popular open-source firmware for wireless routers and access points. If you want to install DD-WRT on Arch Linux, this tutorial will guide you through the process.
First, visit the official website of DD-WRT at https://dd-wrt.com/ and download the firmware for your specific router. Make sure to download the stable version.
Connect your computer to the router through a wired or wireless connection. For wired connections, use an Ethernet cable to connect your computer to the router's LAN port.
For wireless connections, connect to the router's Wi-Fi network using the network name (SSID) and password provided by the router.
Next, access the router's admin panel from your computer by opening a web browser and typing the router's IP address (usually 192.168.1.1 or 192.168.0.1) in the address bar.
Enter the admin username and password to log in to the admin panel.
In the router's admin panel, locate the firmware upgrade section. Upload the DD-WRT firmware file that you downloaded in Step 1.
Wait for the firmware installation process to complete. Do not turn off the router or disconnect from the network during the installation process.
After the firmware installation completes, you can access the DD-WRT web interface at the router's IP address with the port of 80.
Here, you can configure and optimize your router's settings using the DD-WRT web interface. You can set up your Wi-Fi network, allocate bandwidth, and configure advanced network settings, among others.
That's it for this tutorial! By following these steps, you should now have successfully installed DD-WRT firmware on your router or access point. Enjoy the added functionality and features that DD-WRT provides!
If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!
Alternatively, for the best virtual desktop, try Shells!
