How to Install MiroTalk SFU on Clear Linux Latest

MiroTalk SFU is a selective forwarding unit (SFU) for WebRTC-based video conference solutions. In this tutorial, we will guide you through the process of installing MiroTalk SFU on Clear Linux Latest.

Prerequisites

Before you start, make sure that you have the following:

• A virtual or physical machine running Clear Linux latest (version 34520 or higher).
• A user account with sudo privileges.

Step 1 - Enable Required Bundles

MiroTalk SFU requires several bundles to be installed on the Clear Linux system. These bundles are not installed by default but can be enabled using the swupd command-line tool. To enable the required bundles, run the following commands:

sudo swupd bundle-add network-basic
sudo swupd bundle-add network-utilities
sudo swupd bundle-add devpkg-openssl
sudo swupd bundle-add devpkg-glib
sudo swupd bundle-add devpkg-jansson
sudo swupd bundle-add devpkg-glib-networking
sudo swupd bundle-add devpkg-libsoup

These commands will ensure that all the necessary dependencies are installed on the system.

Step 2 - Download and Install MiroTalk SFU

MiroTalk SFU can be downloaded from the official website.

1. Open a web browser and go to the following URL: https://mirotalk.com/download/
2. Click on the "SFU" button to download the MiroTalk SFU package.
3. Once the package is downloaded, open the Terminal application.
4. Navigate to the directory where the downloaded package is located.
5. Extract the package by running the following command:

tar -xvf mirotalk-sfu-VERSION.tar.gz

6. Change the current directory to the extracted MiroTalk SFU directory.

cd mirotalk-sfu-VERSION

7. Install MiroTalk SFU by running the following command:

sudo ./install.sh

This will install the MiroTalk SFU on your system.

Step 3 - Configure MiroTalk SFU

After the installation, you need to configure the MiroTalk SFU for your server environment.

1. Open the following configuration file in a text editor:

/etc/mirotalk/mirotalk-sfu.conf

2. Edit the configuration file as per your requirements. Make sure to set the webrtc_cert_file, webrtc_key_file, and admin_key parameters to appropriate values.
3. Save and exit the file.

Step 4 - Start and Enable MiroTalk SFU Service

Once the installation and configuration are done, you can start the MiroTalk SFU service.

1. Start the MiroTalk SFU service by running the following command:

sudo systemctl start mirotalk-sfu

2. Check the status of the service.

sudo systemctl status mirotalk-sfu

If everything is correct, you should see something like:

mirotalk-sfu.service - MiroTalk SFU
   Loaded: loaded (/etc/systemd/system/multi-user.target.wants/mirotalk-sfu.service; enabled; vendor preset: disabled)
   Active: active (running) since Sun 2021-07-18 01:20:24 CST; 13s ago
 Main PID: 1234 (mirotalk-sfu)
    Tasks: 11
   Memory: 2.5M
      CPU: 175ms
   CGroup: /system.slice/mirotalk-sfu.service
           └─1234 /usr/bin/mirotalk-sfu --config=/etc/mirotalk/mirotalk-sfu.conf

3. Enable the MiroTalk SFU service to start at boot time by running:

sudo systemctl enable mirotalk-sfu

That's it! You have successfully installed and configured MiroTalk SFU on Clear Linux.

Conclusion

In this tutorial, we have shown you how to install and configure MiroTalk SFU on Clear Linux Latest. We hope this tutorial helped you get started with MiroTalk SFU. If you have any questions or comments, please let us know!

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!