Installing BeanstalkD on Debian

This tutorial will guide you through the steps to install BeanstalkD on Debian.

Prerequisites

Before you start, make sure you have the following prerequisites:

• A Debian machine with root access
• SSH access to the Debian machine

Steps

1. Update Your System

   sudo apt-get update
   sudo apt-get upgrade
   

2. Install BeanstalkD

   sudo apt-get install beanstalkd
   

3. Start the BeanstalkD Service

   sudo systemctl start beanstalkd
   

4. Check if the Service is Running

   sudo systemctl status beanstalkd
   

   The output should indicate that the service is running, like the following:

   ● beanstalkd.service - high-performance message queue
      Loaded: loaded (/lib/systemd/system/beanstalkd.service; enabled; vendor preset: enabled)
      Active: active (running) since Mon 2019-09-02 15:55:01 CST; 56s ago
   

   If the service is not running, use the following command to start it:

   sudo service beanstalkd start
   

5. Test BeanstalkD

   To test if BeanstalkD is working properly, run the following command:

   beanstalkd -v
   

   The output should show the version number of BeanstalkD installed on your system.

6. Configure BeanstalkD (Optional)

   BeanstalkD configuration file is located at /etc/default/beanstalkd.

   You can configure settings such as the number of seconds to wait before a job becomes ready, the maximum job size, and the maximum number of connections.

   To edit the configuration file, run the following command:

   sudo nano /etc/default/beanstalkd
   

7. Conclusion

   BeanstalkD has been successfully installed on your Debian machine. You can now use BeanstalkD for your message queueing needs.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!