This tutorial will guide you through the process of installing OpenNode on Elementary OS.
Visit the OpenNode website at http://opennodecloud.com and download the latest package.
Open the Terminal and enter the following command to install the necessary dependencies:
sudo apt-get install python-software-properties python g++ make
Once the dependencies are installed, you need to extract the OpenNode package that you downloaded in Step 1. To do this, navigate to the folder where the file is located and run the following command:
tar xvzf opennode-0.10.1.tar.gz
Next, navigate into the extracted OpenNode directory using the following command:
cd opennode-0.10.1
Now, you can run the following command to install OpenNode:
sudo make install
Once OpenNode is installed, you need to configure it. Run the following command to open the OpenNode configuration file:
sudo nano /etc/opennode.conf
Update the values in the configuration file as necessary, and then save and close the file.
After configuring OpenNode, you can start it using the following command:
sudo opennode start
Congratulations! You have successfully installed OpenNode on Elementary OS.
If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!
Alternatively, for the best virtual desktop, try Shells!
