How to Install Privoxy on Elementary OS

Privoxy is a non-caching web proxy with filtering capabilities that can be used to enhance privacy online. This tutorial will guide you on how to install Privoxy on Elementary OS.

Step 1: Update the System

Before you start installing Privoxy, it's recommended to update your system packages to ensure that you have the latest software available.

To do this, open the terminal and run:

sudo apt-get update
sudo apt-get upgrade

Step 2: Install Privoxy

To install Privoxy, open the terminal and run the following command:

sudo apt-get install privoxy

This will install the latest version of Privoxy from the official Ubuntu repositories.

Step 3: Configure Privoxy

Once Privoxy is installed, you need to configure it to work with your system.

To begin, open the configuration file with your text editor:

sudo nano /etc/privoxy/config

Inside the configuration file, you need to make the following changes:

1. Uncomment the line that starts with "listen-address" and replace the IP address with "127.0.0.1".
2. Uncomment the line that starts with "toggle" to enable toggling Privoxy on/off.
3. Uncomment the line that starts with "enable-remote-toggle" to allow toggling Privoxy from a remote location.

Save and close the file when you're done.

Step 4: Start Privoxy

To start Privoxy, run the following command:

sudo service privoxy start

You can verify that Privoxy is running by checking the status:

sudo service privoxy status

Step 5: Configure Your Browser

Now that Privoxy is up and running, you need to configure your browser to use it. In general, you'll need to set the proxy server to "127.0.0.1" and the port to "8118".

Note that the exact steps for configuring your browser will depend on the browser you're using. Here's an example for Google Chrome:

1. Open Chrome and click on the three dots in the top-right corner.
2. Click on "Settings" and then scroll down to click on "Advanced".
3. Scroll down again to the "System" section and click on "Open proxy settings".
4. In the new window that opens, click on the "LAN settings" button.
5. Check the box that says "Use a proxy server for your LAN".
6. In the "Address" field, type "127.0.0.1".
7. In the "Port" field, type "8118".
8. Click on "OK" to save the changes.

Conclusion

Now that you've successfully installed and configured Privoxy, you can enjoy enhanced privacy online. You can also configure Privoxy further by adding filters and rules to block specific content that you don't want to see. Check out the official documentation for more information on how to do this.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!