How to Install Ganeti on EndeavourOS Latest?

Ganeti is a virtual server management software tool that allows you to manage virtual machines in a cluster. In this tutorial, we will discuss how to install Ganeti on EndeavourOS Latest.

Prerequisites

Before installing Ganeti, you will need to ensure that your system meets the following requirements:

• A fresh installation of EndeavourOS Latest with root or sudo privileges.
• A minimum of 2 or more servers/nodes with the same architecture and running the same version of Linux OS.
• A shared storage system with support for DRBD (Distributed Replicated Block Device) and LVM (Logical Volume Manager).

Step 1: Install Ganeti

To install Ganeti, you can use the pacman package manager. Open the terminal and run the following command:

sudo pacman -S ganeti

Step 2: Configure the Hostname

Next, you need to configure the hostname for your node. You can do this by editing the /etc/hostname file.

sudo nano /etc/hostname

In the file, add the hostname for your node.

one.example.com

Save and exit the file.

Step 3: Reboot the System

To ensure that the new hostname is applied, you will need to reboot your system.

sudo reboot

Step 4: Configure Network Settings

After the reboot, you need to configure the network settings for your node. You can do this by editing the /etc/network/interfaces file.

sudo nano /etc/network/interfaces

In the file, add the following configuration for your node:

auto eth0
iface eth0 inet static
    address 192.168.1.200
    netmask 255.255.255.0
    gateway 192.168.1.1

Save and exit the file.

Step 5: Configure DRBD and LVM

Next, you need to configure DRBD and LVM on your cluster. Refer to the official Ganeti documentation for detailed instructions on how to configure DRBD and LVM.

Step 6: Create a Cluster

After configuring DRBD and LVM, you can create a cluster using the following command:

sudo gnt-cluster init <clustername>

Replace <clustername> with a name for your cluster.

Step 7: Add Nodes to the Cluster

Once you have created a cluster, you can add nodes to it using the following command:

sudo gnt-node add <nodename>

Replace <nodename> with the hostname of your node.

Step 8: Verify the Cluster

You can verify that the cluster is working correctly by running the following command:

sudo gnt-cluster verify

This will perform a series of tests to ensure that the cluster is functioning correctly.

Conclusion

In this tutorial, we have discussed how to install Ganeti on EndeavourOS Latest. We covered the prerequisites, installation, and configuration steps required to set up a Ganeti cluster. Once you have completed these steps, you can use Ganeti to manage your virtual machines in a cluster.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!