How to Install NSQ on EndeavourOS Latest

In this tutorial, you will learn how to install NSQ on EndeavourOS latest.

Prerequisites

Before we begin, make sure you have the following:

• EndeavourOS latest installed
• A terminal emulator
• Basic knowledge of Linux

Steps

Step 1: Install Go

NSQ is written in the Go programming language, so we need to install it first. To do this, open the terminal emulator and run the following command:

sudo pacman -S go

This will install the Go programming language.

Step 2: Download and Install NSQ

The next step is to download and install NSQ. To do this, follow these instructions:

1. Open the terminal emulator and run the following command to clone the NSQ repository:

git clone https://github.com/nsqio/nsq.git

2. Navigate to the nsq directory by running the following command:

cd nsq

3. Build and install NSQ by running the following commands:

make
sudo make install

Step 3: Verify Installation

To verify that NSQ is installed correctly, run the following command:

nsqd

This should start the NSQ daemon. You can also run the following commands to verify the installation:

nsqlookupd
nsqadmin

These commands should start the NSQ lookup daemon and the NSQ admin server, respectively.

Conclusion

Congratulations! You have successfully installed NSQ on EndeavourOS latest. NSQ is a powerful distributed messaging platform that allows you to build scalable and reliable applications.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!