SANE (Scanner Access Now Easy) is an application programming interface (API) that provides standardized access to scanner devices. It allows software applications to interface with any scanner that implements the SANE API. In this tutorial, we will cover how to install SANE Network Scanning on a Fedora Server latest version.
Before you begin this tutorial, ensure that you have the following:
First, update the repository and upgrade any currently installed packages by running the following command:
sudo dnf update
To install SANE Network Scanning, run the following command:
sudo dnf install sane-backends sane-backends-libs sane-backends-devel
To configure your network scanner, you first need to determine its IP address. You can use the nmap command to scan your network for connected devices.
sudo nmap -sP 192.168.0.*
In the above command, replace 192.168.0. with your own network IP address.
After scanning, you should have a list of all devices connected to your network. Look for a device with the manufacturer name of your scanner.
Once you have located your scanner, take note of its IP address.
To add your scanner to your SANE configuration, you must edit the sane.d file located at /etc/sane.d/.
Open the file using the following command:
sudo nano /etc/sane.d/net.conf
Add the following line to the file, replacing 192.168.0.100 with your scanner's IP address:
# My Scanner
192.168.0.100
Save and close the file.
To test your scanner, run the following command:
sudo scanimage -L
You should see your scanner listed as an available device.
Congratulations! You have successfully installed SANE Network Scanning on your Fedora Server and configured your network scanner for use.
If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!
Alternatively, for the best virtual desktop, try Shells!
