How to Install DietPi on FreeBSD Latest

DietPi is an optimized and streamlined operating system for single-board computers, designed for maximum efficiency. This tutorial will guide you through installing DietPi on FreeBSD Latest.

Prerequisites

• A computer with FreeBSD Latest installed.
• An internet connection.

Step 1: Download and Extract the DietPi Image

1. Go to https://dietpi.com/ and download the latest DietPi image for ArmHF.
2. Extract the downloaded file to get the .img file.

Step 2: Write the DietPi Image to a microSD Card

1. Insert the microSD card into your computer.
2. Open a terminal and run the command dmesg to find the device name of your microSD card (e.g. /dev/sdb).
3. Use the dd command to write the DietPi image to the microSD card. Replace /dev/sdb with the device name of your microSD card:

sudo dd if=/path/to/dietpi.img of=/dev/sdb bs=4M status=progress conv=fdatasync

4. Wait for the process to finish.

Step 3: Boot Your Device from the microSD Card

1. Insert the microSD card into your device.
2. Boot your device and follow the on-screen instructions to complete the setup.

Conclusion

Congratulations, you have successfully installed DietPi on your FreeBSD Latest computer! You can now enjoy the optimized and streamlined operating system for maximum efficiency.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!