SANE (Scanner Access Now Easy) Network Scanning provides a unified way to access scanners over a network. This tutorial will guide you through the installation process of SANE Network Scanning on FreeBSD Latest.
Before installing SANE Network Scanning, make sure that you have a FreeBSD Latest operating system installed and that you have administrative privileges.
The first step is to install the dependencies required by SANE network scanning. To do this, open the terminal and run the following command:
pkg install sane-backends
This command will install the sane-backends package and all its dependencies.
Next, you need to configure SANE to work with your scanner. SANE configuration is stored in the /usr/local/etc/sane.d directory.
First, create a new file called net.conf in /usr/local/etc/sane.d:
sudo touch /usr/local/etc/sane.d/net.conf
Then, open the file and add the following line:
<your scanner ip address>
Replace <your scanner ip address> with the IP address of your scanner. You can find your scanner’s IP address by checking your router’s web interface or by running the following command on a Linux or macOS system that’s on the same network as the scanner:
sudo nmap -sP <your network ip address>/24
This command will list all the devices on your network, including your scanner.
To test if SANE is working correctly, run the following command:
sudo scanimage -L
This command should display a list of scanners connected to your network, including your scanner.
In this tutorial, you learned how to install SANE Network Scanning on FreeBSD Latest. You also learned how to configure SANE to work with your scanner and how to test SANE to ensure it’s working correctly. With SANE Network Scanning, you can easily scan documents and images from any device on your network.
If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!
Alternatively, for the best virtual desktop, try Shells!
