How to Install Tinc on Linux Mint Latest

Tinc is a Virtual Private Network (VPN) tool used to create secure meshes between networks. In this tutorial, we will show you how to install Tinc on Linux Mint latest version.

Prerequisites

Before you start the installation, make sure you have administrative access to your Linux Mint system. Also, ensure that your system is up-to-date by running the following command:

sudo apt-get update && sudo apt-get upgrade

Step 1: Install Tinc

To install Tinc, open a terminal and type the following command:

sudo apt-get install tinc

This will download and install Tinc and its dependencies.

Step 2: Configure Tinc

Once Tinc has been installed, you need to configure it. The configuration files are located in the /etc/tinc directory.

Create a new directory for your Tinc network by running the following command:

sudo mkdir /etc/tinc/<network name>

Replace <network name> with the name of your Tinc network.

Navigate to the newly created directory:

cd /etc/tinc/<network name>

Create the configuration file:

sudo nano tinc.conf

Add the following lines to the tinc.conf file:

Name = <machine name>
Interface = tun0
AddressFamily = ipv4

Replace <machine name> with your machine's name.

Create the tinc-up script:

sudo nano tinc-up

Add the following lines to the tinc-up file:

#!/bin/sh

ifconfig $INTERFACE <ip address> netmask <subnet mask>

Replace <ip address> and <subnet mask> with your network's IP address and subnet mask.

Make the tinc-up file executable:

sudo chmod +x tinc-up

Create the tinc-down script:

sudo nano tinc-down

Add the following lines to the tinc-down file:

#!/bin/sh

ifconfig $INTERFACE down

Make the tinc-down file executable:

sudo chmod +x tinc-down

Create the hosts file:

sudo nano hosts/<machine name>

Add the following lines to the hosts/<machine name> file:

Address = <IP address>
Subnet = <subnet mask>

Replace <IP address> and <subnet mask> with your network's IP address and subnet mask.

Create the rsa_key.pub and rsa_key files:

sudo tincd -n <network name> -K4096

Step 3: Start Tinc

To start Tinc, run the following command:

sudo tincd -n <network name>

Replace <network name> with the name of your Tinc network.

Conclusion

In this tutorial, we have shown you how to install and configure Tinc on Linux Mint latest version. Now you can use Tinc to create secure meshes between networks.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!