How to install Packetbeat on MXLinux Latest

Packetbeat is an open-source data shipper that captures network data and sends it to Elasticsearch or Logstash. In this tutorial, we will guide you on how to install Packetbeat on MXLinux Latest.

Prerequisites

• MXLinux Latest installed on your system
• Admin or root access

Step 1: Download Packetbeat

First, we need to download Packetbeat from the official Elastic website. Head over to their downloads page and select the relevant release. You can download the Debian package for Packetbeat from there.

Alternatively, you can use the following command to download Packetbeat from the terminal:

$ curl -L -O https://artifacts.elastic.co/downloads/beats/packetbeat/packetbeat-7.16.3-amd64.deb

Replace the version number with the latest available version.

Step 2: Install Packetbeat

Once the Packetbeat package is downloaded, use the following command to install it on your system:

$ sudo dpkg -i packetbeat-7.16.3-amd64.deb

This will install Packetbeat along with its required dependencies.

Step 3: Configure Packetbeat

Now that we have Packetbeat installed on our system, let's configure it to capture network data. The configuration file for Packetbeat is located at /etc/packetbeat/packetbeat.yml.

Open the file with your favorite text editor:

$ sudo nano /etc/packetbeat/packetbeat.yml

Update the following settings as per your requirements:

• interfaces: This setting specifies the network interfaces that Packetbeat should capture data from. By default, it captures data from all interfaces. Example:

interfaces:
  device: any

• output.elasticsearch: This setting specifies the Elasticsearch output that Packetbeat should send data to. By default, it sends data to localhost:9200. Example:

output.elasticsearch:
  hosts: ["https://your-elasticsearch-host:9200"]
  username: "your-elasticsearch-username"
  password: "your-elasticsearch-password"

Save and close the file.

Step 4: Start Packetbeat

We can now start Packetbeat using the following command:

$ sudo systemctl start packetbeat

You can check the status of Packetbeat using the following command:

$ sudo systemctl status packetbeat

If everything is configured correctly, Packetbeat should start capturing network data and sending it to Elasticsearch.

Conclusion

In this tutorial, we learned how to install and configure Packetbeat on MXLinux Latest. You can now use Packetbeat to monitor and analyze network traffic.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!