How to Install SANE Network Scanning on MXLinux Latest

If you want to share a scanner over a network with multiple users and computers, SANE Network Scanning is an excellent solution. In this tutorial, we will guide you through the process of installing SANE Network Scanning on MXLinux Latest.

Prerequisites

Before you start the installation, make sure you have the following prerequisites:

• An MXLinux Latest installation with root access.
• A scanner that is compatible with SANE Network Scanning.
• A working network connection.

Step 1: Install Required Packages

The first step is to install the required packages for SANE Network Scanning.

1. Open the terminal on your MXLinux Latest system by pressing Ctrl + Alt + T.

2. Run the following command to update the package repository:

   sudo apt update
   

3. Install the required packages by running the following command:

   sudo apt install sane-utils sane-utils-doc libsane libsane-dev libsane-extras libsane-extras-dev
   

Step 2: Configure Scanner on the Server

The next step is to configure the scanner on the server that you want to share over the network.

1. Connect your scanner to the server and switch it on.

2. Open the terminal and run the following command to detect the scanner:

   sudo sane-find-scanner
   

   The output will show you the detected scanner on your system.

3. Once you have the name of your scanner, you can configure it by creating a new configuration file:

   sudo nano /etc/sane.d/my-scanner.conf
   

4. Copy and paste the following lines into the file and save it.

   network
   <IP_Address_of_Scanner>
   

   Replace <IP_Address_of_Scanner> with the IP address of your scanner.

5. Restart the SANE daemon by running the following command:

   sudo service saned restart
   

The scanner is now ready to share over the network.

Step 3: Install SANE on the Client

Finally, we need to install SANE on the client computers that want to access the scanner over the network.

1. Open the terminal on the client system.

2. Run the following command to install SANE:

   sudo apt install sane-utils
   

3. Type y and press Enter to confirm the installation.

4. Once the installation is complete, run the following command to detect the scanner on the network:

   sudo scanimage -L
   

   The output will show you the detected scanner over the network.

5. You can now scan from the client system using any scanning software that is compatible with SANE.

Congratulations! You have successfully installed and configured SANE Network Scanning on MXLinux Latest. Now, you can easily share your scanner over the network with other users and computers.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!