How to Install Volumio on MXLinux Latest

In this tutorial, we will walk through the steps of installing Volumio on MXLinux.

Prerequisites

Before we start, you need to make sure you have the following:

• A computer running MXLinux Latest (version 19.4 as of this writing).
• A stable internet connection.
• A USB drive with at least 2GB of capacity.

Step-by-Step Instructions

1. Download the latest version of Volumio from the official website (https://volumio.com/).

2. Insert the USB drive into your computer and format it to FAT32.

3. Extract the downloaded Volumio image using a file archiver program like 7-Zip or WinRAR.

4. Open a terminal and navigate to the location of the extracted image.

5. Execute the following command to copy the Volumio image to your USB drive. Replace /dev/sdb with the device name of your USB drive.

   sudo dd bs=4M if=./volumio-<version>-pi.img of=/dev/sdb status=progress conv=fsync
   

6. Once the copy process is complete, eject the USB drive and insert it into the Raspberry Pi.

7. Boot up the Raspberry Pi and wait for Volumio to start.

8. Connect to Volumio network by typing http://volumio.local in any web browser on a device connected to the same network as the Raspberry Pi.

9. Follow the on-screen instructions to complete the Volumio setup.

10. After the setup is completed, you can start playing your favorite music using Volumio.

Conclusion

That's it! You now have Volumio installed on MXLinux Latest. Enjoy your music!

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!