How to Install BeanstalkD on NetBSD

BeanstalkD is a simple, fast work queue that runs on NetBSD. In this tutorial, we will guide you on how to install BeanstalkD on NetBSD.

Prerequisites

Before we proceed with the installation, you need to ensure that your NetBSD instance is up to date by running:

sudo pkgin -y update
sudo pkgin -y upgrade

Installation

To install BeanstalkD on your NetBSD system, follow the steps below:

1. Open your terminal and run the following command to install BeanstalkD:

   sudo pkgin -y install beanstalkd
   

2. Once installed, you need to enable and start the BeanstalkD service. To do this, create a new file called /etc/rc.conf.d/beanstalkd and paste the following contents:

   beanstalkd=YES
   

   Save and close the file.

3. Now, start the BeanstalkD service:

   sudo /etc/rc.d/beanstalkd start
   

4. Verify that the service is running by running:

   ps aux | grep beanstalkd
   

   You should see something like this:

   beanstalkd  62520  0.0  0.0   984  1076  ??  Ss    4:15PM   0:00.01 /usr/pkg/sbin/beanstalkd -l 127.0.0.1 -p 11300
   

5. Finally, configure your firewall to allow incoming connections to BeanstalkD:

   sudo /sbin/pfctl -e
   sudo echo 'pass in on lo0 proto tcp from any to any port 11300' >> /etc/pf.conf
   sudo /sbin/pfctl -f /etc/pf.conf
   

Congratulations! You have successfully installed BeanstalkD on your NetBSD system.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!