This tutorial will guide you through the process of installing DD-WRT on your NetBSD system. DD-WRT is an open-source firmware for wireless routers that provides extensive customization options and features. It is compatible with a wide range of hardware, including many popular routers.
Before you start the installation process, you need to make sure that you have the following prerequisites:
Follow these steps to install DD-WRT on your NetBSD system:
Connect your computer to the router that you want to install DD-WRT on.
Log in to your NetBSD system as the superuser.
Download the DD-WRT firmware for your router from https://dd-wrt.com/ and save it to your computer.
Open a terminal on your NetBSD system.
Use the following command to check the name of your router's network interface:
ifconfig
Note the name of the interface that is connected to the router.
Use the following command to transfer the DD-WRT firmware to the router:
scp /path/to/dd-wrt-firmware.bin root@routerip:/tmp/
Replace /path/to/dd-wrt-firmware.bin with the path to the DD-WRT firmware file that you downloaded, and replace routerip with the IP address of your router.
Use the following command to connect to the router via SSH:
ssh root@routerip
Replace routerip with the IP address of your router.
Use the following command to flash the DD-WRT firmware to the router:
mtd -r write /tmp/dd-wrt-firmware.bin linux
Wait for the firmware installation process to complete.
Restart your router by executing the following command:
reboot
Wait for the router to reboot and start up DD-WRT.
Use a web browser to connect to the router's IP address and verify that DD-WRT is working correctly.
Congratulations, you have successfully installed DD-WRT on your NetBSD system!
If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!
Alternatively, for the best virtual desktop, try Shells!
