Eonza is an open-source automation tool that is designed to allow users to automate various tasks on their computer systems. In this tutorial, we will guide you through the process of installing Eonza on NetBSD.
Before you begin the installation process, make sure that you have the following four main prerequisites:
First, you have to install git, Python 3, and PIP3, which are all needed for the installation process of Eonza.
$ sudo pkgin update
$ sudo pkgin install git python38 py38-pip
In this step, you will need to clone the Eonza repository into your system. We recommend that you use the following directory: /usr/local/src/.
$ sudo git clone https://github.com/turboBasic/eonza.git /usr/local/src/eonza
Navigate to the Eonza directory and install the required Python packages as shown below:
$ cd /usr/local/src/eonza
$ sudo pip install -r requirements.txt
Now that you have installed all the required packages, you can start the Eonza server with the following command:
$ sudo python3 /usr/local/src/eonza/manage.py runserver 0.0.0.0:8081
Note: You can change the port number to the one of your choice.
Finally, you can access the Eonza web interface using any modern web browser. Type your NetBSD IP address and the specified port number.
<td><a href="http://your_netbsd_ip:8081/" target="_blank">Eonza</a></td>
That’s it! You have successfully installed Eonza on your NetBSD operating system. You can now start creating and executing automation tasks using the Eonza web interface.
If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!
Alternatively, for the best virtual desktop, try Shells!
