Installing Raveberry on NetBSD

Raveberry is an open source project that lets you create a portable, standalone music player using a Raspberry Pi and a touchscreen display. In this tutorial, we will guide you on how to install Raveberry on NetBSD.

Requirements

• Raspberry Pi with Raspbian installed
• Touchscreen display
• Internet connection

Installation Steps

1. Login to your Raspberry Pi and open up a terminal.

2. Install git by running the following command:

sudo apt-get update
sudo apt-get install git

3. Clone the Raveberry repository and change into the directory:

git clone https://github.com/raveberry/raveberry.git
cd raveberry

4. Install dependencies using the following command:

sudo apt-get install libasound2-dev libssl-dev libgles2-mesa-dev libgbm-dev libdrm-dev libinput-dev libxkbcommon-dev

5. Run the following command to start the Raveberry setup:

sudo ./setup.sh

6. Follow the on-screen instructions to configure the Raveberry setup.

7. Once the setup is complete, start the Raveberry service using the following command:

sudo systemctl start raveberry.service

8. Open a web browser and navigate to http://localhost:8080 to access the Raveberry interface.

Congratulations! You have successfully installed Raveberry on your NetBSD system. Enjoy your new portable music player!

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!