Dnsmasq is a lightweight DNS, DHCP, and TFTP server that is easy to configure and maintain. This tutorial will guide you through the process of installing Dnsmasq on NetBSD.
Before you begin, you will need:
To install Dnsmasq on NetBSD, we need to first install the required packages. Open the Terminal and enter the following command:
pkgin update
pkgin install dnsmasq
This will update the package information and install Dnsmasq.
After installing Dnsmasq on NetBSD, it needs to be configured. Open the /usr/pkg/etc/dnsmasq.conf file using any text editor of your choice:
vi /usr/pkg/etc/dnsmasq.conf
This file will contain all the default settings for Dnsmasq. You can edit this file as per your requirements.
Here are a few basic settings that should be updated in the file:
interface=eth0
dhcp-range=192.168.1.50,192.168.1.150,24h
address=/apple.com/192.168.1.1
listen-address=192.168.1.1
The above settings define:
interface: The Ethernet interface on which Dnsmasq should listen.dhcp-range: The range of IP addresses to be assigned by the DHCP server.address: A hostname-to-IP address mapping.listen-address: The IP address on which Dnsmasq should listen.Save the file and exit.
Now that Dnsmasq is installed and configured, it's time to start the service. Enter the following command in the Terminal:
/usr/pkg/sbin/dnsmasq
Dnsmasq will start running, and you can verify its status using the following command:
/usr/pkg/sbin/dnsmasq --test
This command will test Dnsmasq's configuration and print any errors or warnings, if any.
Congratulations! You have successfully installed Dnsmasq on NetBSD. You can now use it to manage DNS, DHCP, and TFTP services on your network.
If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!
Alternatively, for the best virtual desktop, try Shells!
