How to Install Bareos on OpenBSD

Bareos is an open-source backup solution that is designed to be compatible with a wide range of platforms. In this tutorial, we will guide you through the installation of Bareos on OpenBSD.

Prerequisites

Before installing Bareos on OpenBSD, you need to make sure that:

• You have a working OpenBSD installation with root access.
• The system is connected to the internet.

Installation

Follow these steps to install Bareos on OpenBSD:

1. Open the terminal on OpenBSD.
2. Use the package manager to install Bareos by running the following command:

$ sudo pkg_add bareos-server bareos-client

3. Once the installation is complete, start the Bareos daemon by running the following command:

$ sudo /etc/rc.d/bareos-server start

4. Verify that the Bareos daemon is running by executing the following command:

$ sudo /etc/rc.d/bareos-server status

Configuration

Now that Bareos is installed, you need to configure it to start backing up your data. Here are the steps:

1. Open the Bareos configuration file using your favorite text editor:

$ sudo vi /etc/bareos/bareos-dir.conf

2. Configure the Storage daemon by adding the following to the file:

Storage {
  Name = Tape
  Password = "your_storage_password_here"
  Address = 192.168.1.100
  SDPort = 9103
  Device = FileStorage
  Media Type = File
}

3. Configure the File daemon by editing the bareos-fd.conf file:

$ sudo vi /etc/bareos/bareos-fd.conf

Add the following lines to the file:

Director {
  Name = bareos-dir
  Password = "your_director_password_here"
}

4. Once the configuration is complete, restart the Bareos daemon by running:

$ sudo /etc/rc.d/bareos-server restart

Congratulations! You have successfully installed and configured Bareos on OpenBSD. You can now start backing up your data by specifying the files and directories you want to be backed up using the bconsole tool.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!