How to Install DD-WRT on OpenSUSE Latest

DD-WRT is a powerful and customizable Linux-based firmware for wireless routers, which can be installed on a variety of routers to enhance their performance and features. In this tutorial, we will show you how to install DD-WRT on OpenSUSE Latest.

Prerequisites

Before we get started, make sure that:

• You have a compatible router that supports DD-WRT installation. You can check the compatibility list on the DD-WRT website.
• You have a computer running OpenSUSE Latest.

Step 1: Download the DD-WRT Firmware

First, download the firmware file for your router model from the DD-WRT website and save it to your computer.

Step 2: Connect your Router to your Computer

Connect your router to your computer using an Ethernet cable. Make sure that your router is connected to a power source.

Step 3: Set a Static IP Address for your Computer

To access the router via a web interface, we need to set a static IP address for our computer.

1. Open the terminal on your OpenSUSE Latest computer.
2. Run the following command to open the network settings:

sudo yast lan

3. In the Network Settings dialog box, select the network interface that is connected to your router and click Edit.

4. In the IP Address tab, select Static Address Setup and configure the following settings:

   • IP Address: Enter an IP address for your computer in the same subnet as your router. For example, if your router IP address is 192.168.1.1, you can set your computer IP address as 192.168.1.2.
   • Netmask: Enter the netmask for your network. For most home networks, the netmask is 255.255.255.0.
   • Default Gateway: Enter the IP address of your router. For example, 192.168.1.1.

   

5. Click OK to save the changes.

Step 4: Access the Router's Web Interface

To access the router's web interface, open a web browser and enter the IP address of your router in the address bar. For example, http://192.168.1.1. If you are prompted to enter a username and password, use the default credentials for your router.

Step 5: Upload and Install the DD-WRT Firmware

1. Once you have logged into your router's web interface, go to the Administration tab and click on Firmware Upgrade.

   

2. Click the Choose File button and browse to the location where you saved the DD-WRT firmware file.

3. Select the firmware file and click the Upload button. Wait for a few minutes while the firmware file is uploaded and installed on your router.

4. Once the firmware upgrade is complete, the router may automatically reboot. After the reboot, you should be able to access the DD-WRT web interface by entering the default IP address of your router (192.168.1.1 or 192.168.0.1) in the address bar of your web browser.

Congratulations! You have successfully installed and configured DD-WRT on your router using OpenSUSE Latest. You can now customize your router's settings to enhance its performance and features.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!