In this tutorial, we will guide you through the steps to install nsedit on a POP! OS Latest operating system.
Before installing nsedit, we need to install some necessary dependencies. Open a terminal and run the following command to install the required packages:
sudo apt-get update
sudo apt-get install git libcurl4-openssl-dev libssl-dev cmake -y
Once the installation is complete, run the following command to verify if everything is working:
cmake --version
Next, we need to clone the nsedit repository. Run the following command in the terminal:
git clone https://github.com/tuxis-ie/nsedit.git
This command will clone the repository into your current working directory.
Navigate to the cloned repository by running:
cd nsedit
Now, we need to build and install nsedit. Run the following commands in order:
mkdir build
cd build
cmake ..
make
sudo make install
This command will configure and compile nsedit. make install copies the binary to the /usr/local/bin directory as per standard UNIX convention.
To verify if the installation was successful, run the following command in the terminal:
nsedit --version
This command should show the version information. If you see an output similar to nsedit version 1.0, it means the installation was successful.
That's it! You have successfully installed nsedit on POP! OS Latest.
If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!
