How to Install Packetbeat on macOS

Packetbeat is an open-source lightweight network packet analyzer that sends data to Elasticsearch to help monitor network performance and troubleshoot issues. In this tutorial, we will go through the steps to install Packetbeat on macOS.

Prerequisites

Before we begin, make sure you have the following:

• A macOS running computer
• Administrative privileges on the computer
• A web browser

Step 1 - Download Packetbeat

1. Go to the Packetbeat download page.
2. Choose your preferred version of Packetbeat (the latest version is recommended), and then click on the macOS button to download the package.

Step 2 - Install Packetbeat

1. Locate the downloaded file in your download folder and double-click on it to extract the contents.
2. Open the Terminal app by going to Applications > Utilities > Terminal.
3. Navigate to the extracted Packetbeat folder by typing the following command in the terminal:

cd /path/to/packetbeat/folder

Replace /path/to/packetbeat/folder with the actual path to the extracted Packetbeat folder.

4. In the terminal, run the following command:

sudo ./install.sh

This will launch the Packetbeat installation script and install the necessary files to your computer.

5. Enter your computer's administrator password when prompted.

Step 3 - Configure Packetbeat

1. Open the Packetbeat configuration file (packetbeat.yml) by typing the following command in the terminal:

sudo nano /usr/local/etc/packetbeat/packetbeat.yml

2. Scroll down to the outputs section and update the Elasticsearch output with the Elasticsearch server address and credentials:

output.elasticsearch:
  hosts: ["http://localhost:9200"]
  username: "elastic"
  password: "changeme"

Replace the http://localhost:9200 with the actual Elasticsearch server address, and elastic and changeme with the actual Elasticsearch username and password.

3. Save and close the file by pressing CTRL+X, then Y, then Enter.

Step 4 - Run Packetbeat

1. To start Packetbeat, run the following command:

sudo packetbeat -e -c /usr/local/etc/packetbeat/packetbeat.yml

This will start Packetbeat and enable the console output.

2. Verify that Packetbeat is running by checking for output in the Terminal or by opening your web browser and navigating to the Kibana web interface.

Conclusion

Congratulations! You have successfully installed and configured Packetbeat on macOS. You can now use Packetbeat to monitor network performance and troubleshoot issues.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!