How to Install Volumio on macOS

In this tutorial, we will guide you on how to install Volumio on macOS. Volumio is a free and open-source music player software that offers a high-quality audio experience.

Prerequisites

Before we begin the installation, make sure you have the following prerequisites:

• A macOS computer
• A stable internet connection
• An SD card reader

Step 1: Downloading Volumio

The first step is to download the Volumio image file from the official website at https://volumio.com/. Here are the steps to download Volumio:

1. Open your web browser and go to https://volumio.com/download/.
2. Scroll down and click on the "Download" button under "Raspberry PI".
3. Wait for the download to complete.

Step 2: Installing Volumio on the SD Card

After downloading the Volumio image file, you need to install it on your SD card. Here are the steps to install Volumio on the SD card:

1. Insert the SD card into the SD card reader.
2. Open the Terminal app on your macOS computer.
3. Enter the following command in the Terminal app to display the disk information:

diskutil list

4. Locate the disk identifier of your SD card. It should be something like /dev/diskX where X is the disk number.
5. Unmount the SD card by running the following command:

diskutil unmountDisk /dev/diskX

6. Navigate to the directory where you downloaded the Volumio image file.
7. Extract the image file by running the following command:

unzip volumio-x.x.xx-YYYYMMDD-pi.img.zip

Replace x.x.xx-YYYYMMDD with the version number of the Volumio image file you downloaded.

8. Write the image file to the SD card by running the following command:

sudo dd bs=1m if=volumio-x.x.xx-YYYYMMDD-pi.img of=/dev/rdiskX conv=sync

Replace x.x.xx-YYYYMMDD with the version number of the Volumio image file you downloaded, and X with the disk number of your SD card.

9. Wait for the process to complete, then eject the SD card by running the following command:

diskutil eject /dev/rdiskX

Replace X with the disk number of your SD card.

Step 3: Booting Volumio

Now that Volumio is installed on your SD card, you can boot your Raspberry Pi and start using Volumio. Here are the steps to boot Volumio:

1. Insert the SD card into your Raspberry Pi.
2. Connect your Raspberry Pi to a power source.
3. Wait for Volumio to boot up. This may take a few minutes.
4. Once Volumio has booted up, you can use it to play music.

Conclusion

That's it! You have successfully installed Volumio on your macOS computer. You can now use your Raspberry Pi with Volumio to play high-quality music.

If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!

Alternatively, for the best virtual desktop, try Shells!