Tinc is an open-source VPN software that provides secure communication between computers over the internet. It is available for various operating systems, including NixOS. Here's a step-by-step guide to installing Tinc on NixOS Latest:
The first step is to install the Tinc software on your NixOS system. To do this, open a terminal window and run the following command:
sudo nix-env -iA nixos.tinc
This will download and install the latest version of Tinc on your system.
The next step is to create a Tinc configuration file. This file contains information about your VPN network, such as IP addresses, hostnames, and encryption details. You can create this file manually by running the following command:
sudo nano /etc/tinc/myvpn/tinc.conf
Replace 'myvpn' with the name of your VPN network.
Here's an example of what your Tinc configuration file might look like:
Name = webvpn
AddressFamily = ipv4
Device = /dev/net/tun
Mode = switch
ConnectTo = myvpn
The next step is to generate the Tinc keys. These keys are used for encryption and authentication on your VPN network.
To generate the keys, run the following commands:
cd /etc/tinc/myvpn
sudo tincd -n myvpn -K4096
This command will generate a public and private key for your VPN network. The keys will be stored in the /etc/tinc/myvpn/hosts directory.
The Tinc hosts file contains information about the hosts on your VPN network. You can create this file manually by running the following command:
sudo nano /etc/tinc/myvpn/hosts/hostname
Replace 'hostname' with the name of the host you want to add.
Here's an example of what your Tinc hosts file might look like:
Address = 192.168.1.100
Subnet = 192.168.1.0/24
[webvpn]
Address = vpn.example.com
Subnet = 10.0.0.0/8
Port = 1234
Cipher = aes-256-cbc
PublicKey = 1234567890abcdefghijklmnopqrstuvwxyz
Note that you will need to replace the values in this file with your own.
The final step is to start the Tinc service on your NixOS system. You can do this by running the following command:
sudo systemctl start tinc
This will start the Tinc service and enable it to run automatically at boot time. You can check the status of the service by running the following command:
sudo systemctl status tinc
If everything is set up correctly, you should see a message indicating that the Tinc service is running.
Congratulations! You have now successfully installed and configured Tinc on your NixOS Latest system. You can now use Tinc to securely communicate with other hosts on your VPN network.
If you want to self-host in an easy, hands free way, need an external IP address, or simply want your data in your own hands, give IPv6.rs a try!
Alternatively, for the best virtual desktop, try Shells!